设备功能：烟雾发生器通过喷嘴将液体石蜡雾化成气溶胶，主要用于烟雾报警器及探测器灵敏度及功能测试。ZNSM210型号气溶胶发生内置德国进口无刷泵，无刷泵具有压力高、寿命长、故障少等优点。可能通过控制无刷泵通断时间实现气溶胶发生量，从而控制烟箱中烟雾的浓度。设备参数：型号：ZNSM210 电源：12VDC 功率：200W 适用标准：EN14604,EN54-7,GB20517, GB4715 介质：轻质石蜡水油料瓶：100ml

设备功能：烟雾发生器通过喷嘴将液体石蜡雾化成气溶胶，主要用于烟雾报警器及探测器灵敏度及功能测试。ZNSM220型号气溶胶发生器采用压缩气进行雾化，通过精密压力调节阀，精确控制气压，配置时间控制器，可通过设定连续发烟或周期间隔重复发烟，通过设定通断时间实现气溶胶发生量，从而控制烟箱中烟雾的浓度，可以独立控制运行，具有雾化效率高、寿命长、故障少、操作简单等优点。设备参数：型号：ZNSM220 电源：24VDC 功率：50W 适用标准：EN14604,EN54-7,GB20517, GB4715 介质：轻质石蜡水油料瓶：100ml

设备功能：光学烟密度计主要用于测量烟雾或气溶胶浓度。ZNOBS110型号光学烟密度计由红外光源发射透射光穿过烟箱测试区域反射进入光电元件，通过测量光电信号衰减来测量烟箱内烟雾或气溶胶浓度。智检仪器ZNOBS110型号光学烟密度计采用进口元件，先进光电系统，能够抵御环境温度变化影响以及环境光线影响，零点漂移、温度漂移极小，可以长时间稳定运行。 ZNOBS110型号光学烟密度计适用于EN 54-7，EN 14604，GB 4715,GB 20517等标准烟感探测器试验箱、火灾试验室使用以及其它适用场合。设备参数：型号：ZNOBS110 电源：12VDC 功率：10W 适用标准：EN14604,EN54-7,GB20517, GB4715 探测类型: 透射光光源波长：880nm~950nm, 量程：0~2 dB/m, 零点漂移0.2%F.S.

标准烟箱 – 智检仪器专业生产销售烟雾报警器探测器测试标准烟箱

Q: 火灾灵敏度实验室

设备功能： 火灾灵敏度实验室适用于 UL 217 ， UL268 等标准火灾试验室使用，测试系统室温传感器、炉温传感器、数据采集、电脑及测试软件。 测试软件可以连接采集光学烟密度计、离子浓度计、温湿度传感器等实时测试数据，记录报警值，软件可选择各种材料燃烧测试曲线。 设备参数 ： 型号: ZNULFIR-1 电源: 220VAC 功率：1Kw 适用标准： UL 217，UL 268 标配组件 ： 四路光电池传感器 采集四路MIC信号(MIC 离子浓度计另购) 控制器机柜 一台一氧化碳气体分析仪 两路室温传感器，一路湿度传感器，一路炉温传感器 一路点火器, 一路电烤箱加热控制 采集8路探测器报警信号 点火器，燃料盆，电炉,电烤箱 选配组件 ： 1） 燃烧木材，燃烧棉绳,聚氨酯泡棉，牛肉饼 2） 离子浓度计

Q: 烟雾发生器

设备功能 ： 烟雾发生器通过喷嘴将液体石蜡雾化成气溶胶，主要用于烟雾报警器及探测器灵敏度及功能测试。ZNSM210型号气溶胶发生内置德国进口无刷泵，无刷泵具有压力高、寿命长、故障少等优点。可能通过控制无刷泵通断时间实现气溶胶发生量，从而控制烟箱中烟雾的浓度。 设备参数 ： 型号：ZNSM210 电源：12VDC 功率：200W 适用标准：EN14604,EN54-7,GB20517, GB4715 介质：轻质石蜡水 油料瓶：100ml

Q: 气溶胶发生器

设备功能 ： 烟雾发生器通过喷嘴将液体石蜡雾化成气溶胶，主要用于烟雾报警器及探测器灵敏度及功能测试。ZNSM220型号气溶胶发生器采用压缩气进行雾化，通过精密压力调节阀，精确控制气压，配置时间控制器，可通过设定连续发烟或周期间隔重复发烟，通过设定通断时间实现气溶胶发生量，从而控制烟箱中烟雾的浓度，可以独立控制运行，具有雾化效率高、寿命长、故障少、操作简单等优点。 设备参数 ： 型号：ZNSM220 电源：24VDC 功率：50W 适用标准：EN14604,EN54-7,GB20517, GB4715 介质：轻质石蜡水 油料瓶：100ml

Q: 光学烟密度计

设备功能 ： 光学烟密度计主要用于测量烟雾或气溶胶浓度。ZNOBS110型号光学烟密度计由红外光源发射透射光穿过烟箱测试区域反射进入光电元件，通过测量光电信号衰减来测量烟箱内烟雾或气溶胶浓度。智检仪器ZNOBS110型号光学烟密度计采用进口元件，先进光电系统，能够抵御环境温度变化影响以及环境光线影响，零点漂移、温度漂移极小，可以长时间稳定运行。 ZNOBS110型号光学烟密度计适用于EN 54-7，EN 14604，GB 4715,GB 20517等标准烟感探测器试验箱、火灾试验室使用以及其它适用场合。 设备参数 ： 型号：ZNOBS110 电源：12VDC 功率：10W 适用标准：EN14604,EN54-7,GB20517, GB4715 探测类型: 透射光 光源波长：880nm~950nm, 量程：0~2 dB/m, 零点漂移0.2%F.S.

Q: GAS alarm calibration chamber

Equipment Function ： The equipment is intended for gas alarm or Carbon monoxide alarm testing and calibration in mass production in advantage of its big volume. The equipment provides a sealed stainless-steel chamber with glass door for monitoring alarm status. The special designed big open door can close and secure easily without gas leakage. The volume of chamber and size of samples shelves are custom-made. It can contain about 60 alarms. The controller control high speed valve to inject quantitative high concentration gas into chamber and the gas stirred by circulating fan to get homogeneous test gas in certain concentration. That gas will be test gas for response test or threshold setting of gas alarm product. The circulating fan and porous plate are also specially arranged to get uniform test gas and avoid the high concentrating gas getting into alarm directly during gas injection. On the top of chamber, the inlet and outlet and exhaust fan are controlled by PLC to exchange air in chamber. Component ： CH4/CO gas controller Adjust precision flow control valve manually Set the gas valve open time and inject gas with precision time control. The gas was injected in to chamber in short time and mix quickly. It is easy to count response time of alarm Control precision: +/-5ppm for CO CH4/CO alarm test chamber. 1）Stainless steel chamber with glass windows. 2）samples shelves, can fit with customized adaptor to connect with alarm for power supply or signal transmission 3）Chamber size: 0.8*0.65*1.0m 3.Gas analyzer, CO or CH4 shall be quoted separately

Q: ZNGAS-10 GAS Detectors Test Chamber

Equipment Function ： The equipment is intended for gas alarm or Carbon monoxide alarm sampling test. The equipment provides a sealed stainless-steel chamber with glass door for monitoring alarm status. The volume of chamber and size of samples shelves are custom-made. It can contain about 10 alarms. The controller control high speed valve to inject quantitative high concentration gas into chamber and the gas stirred by circulating fan to get homogeneous test gas in certain concentration. That gas will be test gas for response test or threshold setting of gas alarm product. The air speed are adjustable to get uniform test gas and avoid the high concentrating gas getting into alarm directly during gas injection. Parameter ： Model：ZNGAS-10 Power supply：220vAC,1 kW Applicable standard：EN50194-1, EN50291-1 Chamber：5m x 0.4m x 0.3m. Gas injection：High speed valve, PLC ms time control. Circulation fan：2 PWM fan，set and adjust by HMI HMI：7” touchscreen Gas analyzer,Gas cylinder and pressure control value ：Not included

Q: Fire detector impact Test device

Device features: The detector crash test device is designed and produced in accordance with the EN 54-7 appendix for the crash test of fire alarm system products such as detectors, and the device is composed of a pendulum, an impact head, a weight, a frame, and an adjustable sample mounting bracket, and the height of the sample mounting plate can be easily adjusted up and down by screws according to the shape and height of the sample. Set to meet the following standards: GB 4715 Point-type smoke fire detector clause 4.14 Crash test and Appendix E crash test apparatus GB 20517 Stand-alone smoke fire detection alarm Clause 5.20 Crash test GB 19880 Manual fire alarm button Clause 4.14 Crash test BSEN 54-7 Fire detection and fire alarm systems — Part 7: Smoke detectors — Point detectors using scattered light, transmitted light or ionization Clause 5.14 Impact(operational)and Annex E Apparatus for impact test BSEN Fire detection and fire alarm systems —Part 11: Manual call points 54-11 5.15 Impact (operational) BSEN 14604 Smoke alarm devices Clause 5.11 Impact(operational)and Annex E Apparatus for impact test Equipment parameters: 1) Model: ZNEN54-IP 2) Standards: EN 14604, EN 54,GB20517, GB4715, GB4716, GB 19880 3) Hammer head size: 76mm wide, 50mm high, 94mm long 4) Hammer weight: 0.79 kg 5) Weight weight: 0.55 kg