Equipment Function ： The equipment is intended for smoke alarm or smoke detectors sampling test. The smoke box is constructed typical sensitivity smoke test chamber construction as specified in appendix B of UL 217 8 th editions or UL 268 similarly. It consists of the following items: Outer Cabinet: constructed of exterior grade plywood according to standards dimension Inner compartment: constructed of plywood according to standards dimension Circulating fan: DC fan powered DC power supply Exhaust fan: AC fan Photocell: as standard recommended Lamp: as standard recommended Data acquisition device: Computer with National Instruments DAQ card Aerosol generator: special design aerosol generator that can adjust build up rate and particle size to meet the UL 217 and UL 268 test profile. Software: Zon-test Smoke box software. The smoke box can be used to perform initial sensitivity test, directionality test, velocity- sensitivity test and other stability test with auxiliary equipment. Note: The UL 217 and UL 268 standard required Measuring Ionization Chamber (MIC) to be included to monitoring smoke particles size. The MIC is not included in quotation if no specified but the mounting port and data acquisition connection port are reserved.

生产线烟箱 – 第 2 页 – 智检仪器专业生产销售烟雾报警器探测器测试标准烟箱

Q: Smoke Alarm Production Test Tunnel

Device features: Production smoke boxes are developed from standard smoke boxes and are used for batch testing or calibration in the production of smoke alarms and detectors. The production of smoke box adopts the same smoke generator and smoke density meter as the standard smoke box, which is composed of the main body of the smoke box, smoke density meter and industrial control computer, in accordance with the standard specifications and parameters, with its own photoelectric sensor, which is used to detect the smoke concentration value in the smoke body, and adopts original imported components to ensure the accuracy and stability of the test. The smoke concentration in the smoke box is controlled by the intelligent PID control software, so that the smoke concentration dB/m value is kept within a constant range. Smoke alarms can be quickly placed in batches for batch detection, or sensitivity calibration. The specially developed Zontest Smoke Test Tunnel software continuously monitors the smoke concentration. The production of smoke boxes can also control the smoke rise rate, which can be used for sampling, R&D testing. Production cigarette boxes can be customized with different pallets or conveyor belts according to customer requirements. Equipment parameters: 1) Model: ZNEN14604-2 2) Power supply: 220V AC power: 5 kW 3) Standard: EN14604, EN54-7, GB20517, GB4715 4) Smoke generator: light paraffin water, particle size distribution between 0.5um~1.0um, 5) Optical smoke density meter: transmitted light, wavelength 880nm~950nm, range: 0~2 dB/m, 6) Box size: 2.2m x 0.5m x 1.1m. Flue cross-sectional size 430mm x 270mm 7) Wind speed: DC motor speed regulation, software set speed 8) Smoke rate: 0.005dB/m by default, which can be set in the software

Q: ZNGAS-10气体报警器测试箱

设备功能： 设备提供一个密封不锈钢测试箱体，可以容纳约3~6个气体报警器，通过控制器定量注入高浓度目标气体，在箱体内形成所需浓度的测气体，可以用于一氧化碳、可燃气体报警器批量标定或批量检测。箱体内装有空气循环风扇，使测试气体快速扩散，达到均匀稳定的测试气体，避免高浓度气体对冲击报警器产生不良影响。 设备优势： 适用各种气体报警器，如一氧化碳报警器，可燃气体报警器； 多功能一体：可以检定也可以检测各种气体报警器； 独特注气方式，注气时间短，快速注气 内置空气循环，扩散速度快， 30秒内扩散均匀； 箱体密封性好，不漏气，安全稳定； 玻璃门，方便观察报警器提示灯； 触屏控制，操作方便； 设备参数 ： 型号：ZNGAS-10 电源：220V AC 功率：1 kW 标准：EN50194-1, EN50291-1 标准气体：气瓶，气体，减压阀由客户自备 箱体尺寸：5m x 0.3m x 0.3m. 气体注入控制器：精密阀，控制器，触屏毫秒时间。 循环风机：1内置，风速可调，触屏开关控制 触摸屏：7寸威伦通

Q: 火灾探测器碰撞试验装置

设备功能 ： 探测器碰撞试验装置按照EN 54-7附录设计生产，用于探测器等火灾报警系统产品碰撞试验，装置由摆锤、撞击头、砝码、框架、可调样品安装架组成，根据样品形状高度,通过螺丝轻易上下调节样品安装板高度。设定满足以下等标准要求： GB 4715 点型感烟火灾探测器条款4.14 碰撞试验及附录E碰撞试验装置 GB 20517 独立式感烟火灾探测报警器 条款5.20 碰撞试验 GB 19880 手动火灾报警按钮 条款4.14碰撞试验 BSEN 54-7 Fire detection and fire alarm systems — Part 7: Smoke detectors — Point detectors using scattered light, transmitted light or ionization Clause 5.14 Impact(operational)and Annex E Apparatus for impact test BSEN Fire detection and fire alarm systems —Part 11: Manual call points 54-11 5.15 Impact (operational) BSEN 14604 Smoke alarm devices Clause 5.11 Impact(operational)and Annex E Apparatus for impact test 设备参数 ： 型号：ZNEN54-IP 标准：EN 14604, EN 54,GB20517, GB4715, GB4716, GB 19880 锤头尺寸：76mm宽,50 mm高, 94 mm长 锤头重量：79 kg 砝码重量：0.55 kg

Q: Smoke Alarm Production Test Tunnel

Equipment Function ： The smoke alarm production test tunnel was designed for batch test or calibration of sensitivity test of Smoke alarms or detectors. The basic work principle is compliance to EN 14604 and EN 54-7. It consist of test tunnel，aerosol generator, obscuration sensor, controller and computer. The obscuration meter was made of high quality electrical and optical components to ensure precision and stable reading. The two floor trays support by rodless air cylinders. They can extend and extract by press button or automatic control. The lids are fixed on tray and can close the opening in extended position and extraction position. The Zomtest Smoke Test Tunnel Software in English is able to set the air speed, aerosol buildup rate (ramp test), constant obs set value. The aerosol concentration is controlled to set value by PID algorithm and can maintain the smoke density with +/-0.004dB/m in reading when door keep closing. After exchange of samples tray, the smoke density will drop and then resume to +/-0.005 range within half minute. Specification ： Model：ZNEN14604-18 Power：220V AC 1KW Standards：EN14604,EN54-7, GB20517, GB4715 Aerosol generator：Liquid paraffin , particle size distribution between 0.5µm~1.0µm， Optical smoke densitometer: transmitted light, wavelength 880nm~950nm, range: 0~2 dB/m, Test tunnel size: 3.1m x 0.5mx 1.1m. Test section size is 430mm x 270mm Wind speed: DC motor speed regulation, software setting speed, from 0 – 1.2 m/s Smoke rising rate: preset 0.005dB/m, can be set in the software. Send Obscuration value to com port via Modbus RTU. client can read the value via RS 485

Q: UL 217/268 标准烟雾探测器测试烟箱

设备功能 ： UL标准烟箱用于检测烟雾报警器灵敏度、方向性等特性，设备满足UL 217 及UL 268要求，标准烟箱由烟箱主体、数据采集卡，电脑及直流电源组成，烟箱主体采用进口板材制成，遵照标准规格参数要求，自带光电传感器，用于检测烟体内的烟雾浓度值 ，采用原装进口元件，确保测试准确性和稳定性。进口直流电源和风扇进行风速控制，可以调节不同风速，满足不同风速测试要求。设备装备美国国家仪器数据采集和专用测试软件（Zontest Smoke box test system），对烟雾浓度和升烟速率进行连续监控，记录报警器灵敏度值。 气溶胶发生器：除进口标准棉灯芯外，配置气溶胶发生器作为可选择烟雾，自动控制，减少耗材成本，重新性高，升烟速率、颗粒大小可调节。