设备功能：烟雾发生器通过喷嘴将液体石蜡雾化成气溶胶，主要用于烟雾报警器及探测器灵敏度及功能测试。ZNSM220型号气溶胶发生器采用压缩气进行雾化，通过精密压力调节阀，精确控制气压，配置时间控制器，可通过设定连续发烟或周期间隔重复发烟，通过设定通断时间实现气溶胶发生量，从而控制烟箱中烟雾的浓度，可以独立控制运行，具有雾化效率高、寿命长、故障少、操作简单等优点。设备参数：型号：ZNSM220 电源：24VDC 功率：50W 适用标准：EN14604,EN54-7,GB20517, GB4715 介质：轻质石蜡水油料瓶：100ml

气体报警器标准箱 – 第 2 页 – 智检仪器专业生产销售烟雾报警器探测器测试标准烟箱

Q: 火灾灵敏度实验室

设备功能： 火灾灵敏度实验室适用于 UL 217 ， UL268 等标准火灾试验室使用，测试系统室温传感器、炉温传感器、数据采集、电脑及测试软件。 测试软件可以连接采集光学烟密度计、离子浓度计、温湿度传感器等实时测试数据，记录报警值，软件可选择各种材料燃烧测试曲线。 设备参数 ： 型号: ZNULFIR-1 电源: 220VAC 功率：1Kw 适用标准： UL 217，UL 268 标配组件 ： 四路光电池传感器 采集四路MIC信号(MIC 离子浓度计另购) 控制器机柜 一台一氧化碳气体分析仪 两路室温传感器，一路湿度传感器，一路炉温传感器 一路点火器, 一路电烤箱加热控制 采集8路探测器报警信号 点火器，燃料盆，电炉,电烤箱 选配组件 ： 1） 燃烧木材，燃烧棉绳,聚氨酯泡棉，牛肉饼 2） 离子浓度计

Q: 气溶胶发生器

设备功能 ： 烟雾发生器通过喷嘴将液体石蜡雾化成气溶胶，主要用于烟雾报警器及探测器灵敏度及功能测试。ZNSM220型号气溶胶发生器采用压缩气进行雾化，通过精密压力调节阀，精确控制气压，配置时间控制器，可通过设定连续发烟或周期间隔重复发烟，通过设定通断时间实现气溶胶发生量，从而控制烟箱中烟雾的浓度，可以独立控制运行，具有雾化效率高、寿命长、故障少、操作简单等优点。 设备参数 ： 型号：ZNSM220 电源：24VDC 功率：50W 适用标准：EN14604,EN54-7,GB20517, GB4715 介质：轻质石蜡水 油料瓶：100ml

Q: 火灾探测器碰撞试验装置

设备功能 ： 探测器碰撞试验装置按照EN 54-7附录设计生产，用于探测器等火灾报警系统产品碰撞试验，装置由摆锤、撞击头、砝码、框架、可调样品安装架组成，根据样品形状高度,通过螺丝轻易上下调节样品安装板高度。设定满足以下等标准要求： GB 4715 点型感烟火灾探测器条款4.14 碰撞试验及附录E碰撞试验装置 GB 20517 独立式感烟火灾探测报警器 条款5.20 碰撞试验 GB 19880 手动火灾报警按钮 条款4.14碰撞试验 BSEN 54-7 Fire detection and fire alarm systems — Part 7: Smoke detectors — Point detectors using scattered light, transmitted light or ionization Clause 5.14 Impact(operational)and Annex E Apparatus for impact test BSEN Fire detection and fire alarm systems —Part 11: Manual call points 54-11 5.15 Impact (operational) BSEN 14604 Smoke alarm devices Clause 5.11 Impact(operational)and Annex E Apparatus for impact test 设备参数 ： 型号：ZNEN54-IP 标准：EN 14604, EN 54,GB20517, GB4715, GB4716, GB 19880 锤头尺寸：76mm宽,50 mm高, 94 mm长 锤头重量：79 kg 砝码重量：0.55 kg

Q: GAS alarm calibration chamber

Equipment Function ： The equipment is intended for gas alarm or Carbon monoxide alarm testing and calibration in mass production in advantage of its big volume. The equipment provides a sealed stainless-steel chamber with glass door for monitoring alarm status. The special designed big open door can close and secure easily without gas leakage. The volume of chamber and size of samples shelves are custom-made. It can contain about 60 alarms. The controller control high speed valve to inject quantitative high concentration gas into chamber and the gas stirred by circulating fan to get homogeneous test gas in certain concentration. That gas will be test gas for response test or threshold setting of gas alarm product. The circulating fan and porous plate are also specially arranged to get uniform test gas and avoid the high concentrating gas getting into alarm directly during gas injection. On the top of chamber, the inlet and outlet and exhaust fan are controlled by PLC to exchange air in chamber. Component ： CH4/CO gas controller Adjust precision flow control valve manually Set the gas valve open time and inject gas with precision time control. The gas was injected in to chamber in short time and mix quickly. It is easy to count response time of alarm Control precision: +/-5ppm for CO CH4/CO alarm test chamber. 1）Stainless steel chamber with glass windows. 2）samples shelves, can fit with customized adaptor to connect with alarm for power supply or signal transmission 3）Chamber size: 0.8*0.65*1.0m 3.Gas analyzer, CO or CH4 shall be quoted separately

Q: ZNGAS-10 GAS Detectors Test Chamber

Equipment Function ： The equipment is intended for gas alarm or Carbon monoxide alarm sampling test. The equipment provides a sealed stainless-steel chamber with glass door for monitoring alarm status. The volume of chamber and size of samples shelves are custom-made. It can contain about 10 alarms. The controller control high speed valve to inject quantitative high concentration gas into chamber and the gas stirred by circulating fan to get homogeneous test gas in certain concentration. That gas will be test gas for response test or threshold setting of gas alarm product. The air speed are adjustable to get uniform test gas and avoid the high concentrating gas getting into alarm directly during gas injection. Parameter ： Model：ZNGAS-10 Power supply：220vAC,1 kW Applicable standard：EN50194-1, EN50291-1 Chamber：5m x 0.4m x 0.3m. Gas injection：High speed valve, PLC ms time control. Circulation fan：2 PWM fan，set and adjust by HMI HMI：7” touchscreen Gas analyzer,Gas cylinder and pressure control value ：Not included

Q: CO alarm calibration chamber

Equipment Function ： The equipment is intended for gas alarm or Carbon monoxide alarm testing and calibration in mass production in advantage of its big volume. The equipment provides a sealed stainless-steel chamber with glass wall for monitoring alarm status. The special designed big open door can close and secure easily without gas leakage. The volume of chamber and size of samples shelves are custom-made. It can hold 100 alarms normally. The controller injects quantitative high concentration gas into chamber and the gas stirred by circulating fan to get homogeneous test gas in certain concentration. That gas will be test gas for response test or threshold setting of gas alarm product. The circulating fan and porous plate are also specially arranged to get uniform test gas and avoid the high concentrating gas getting into alarm directly during gas injection. On the top of chamber, the inlet and outlet and exhaust fan are controlled by PLC to exchange air in chamber. Component ： CH4/CO gas controller Set the gas volume and inject gas with precision control. The gas was injected in to chamber in short time and mix quickly. It is easy to count response time of alarm Control precision: +/-5ppm CH4/CO alarm test chamber. 1）Stainless steel chamber with glass windows. 2）samples shelves, can fit with customized adaptor to connect with alarm for power supply or signal transmission 3）Chamber size: 1.8*1.0*0.8m Gas analyzer, CO or CH4 (customer provide or quote additionally)

Q: ZNGAS-10气体报警器测试箱

设备功能： 设备提供一个密封不锈钢测试箱体，可以容纳约3~6个气体报警器，通过控制器定量注入高浓度目标气体，在箱体内形成所需浓度的测气体，可以用于一氧化碳、可燃气体报警器批量标定或批量检测。箱体内装有空气循环风扇，使测试气体快速扩散，达到均匀稳定的测试气体，避免高浓度气体对冲击报警器产生不良影响。 设备优势： 适用各种气体报警器，如一氧化碳报警器，可燃气体报警器； 多功能一体：可以检定也可以检测各种气体报警器； 独特注气方式，注气时间短，快速注气 内置空气循环，扩散速度快， 30秒内扩散均匀； 箱体密封性好，不漏气，安全稳定； 玻璃门，方便观察报警器提示灯； 触屏控制，操作方便； 设备参数 ： 型号：ZNGAS-10 电源：220V AC 功率：1 kW 标准：EN50194-1, EN50291-1 标准气体：气瓶，气体，减压阀由客户自备 箱体尺寸：5m x 0.3m x 0.3m. 气体注入控制器：精密阀，控制器，触屏毫秒时间。 循环风机：1内置，风速可调，触屏开关控制 触摸屏：7寸威伦通